Structural Solid Timber Spruce NSi – KVH beams planed & finger-jointed

Our structural solid timber made of spruce in NSi quality is suitable for numerous structural applications in timber construction. The KVH beams are made from kiln-dried spruce timber, are planed on all sides, and have slightly chamfered edges.

The 13.0 m long bars are finger-jointed and can be cut to size for shipping or to meet your required length. The available cutting options can be selected directly via the respective product variant.

Technical properties

• Wood species: Spruce
• Quality: NSi
• Structural solid timber / KVH
• acc. to DIN EN 15497 / DIN EN 14080
• planed on all sides
• edges slightly chamfered
• half-log or boxed heart
• bars finger-jointed
• kiln-dried (KD)
• wood moisture content approx. 15% (± 2%)
• lightly glued
• weatherproof glued
• dimensionally stable
• initial length: 13.0 m
• cutting depending on selected variant

Cutting the KVH beams

The beams are cut from a 13.0 m long initial bar according to the selected variant. This allows even longer KVH cross-sections to be ordered and transported conveniently.

Important note regarding cutting:
We perform cuts manually using a chainsaw. Due to the cutting width of the saw, there is a corresponding loss of material with every cut. Therefore, when combining multiple cuts on an initial length of exactly 13.0 m, the resulting pieces may be slightly shorter than the calculated nominal dimension. The cuts should not be considered millimeter-precise finished dimensions.

For applications where an exact final dimension is required, sufficient allowance should be planned for subsequent fine or finish cutting on the construction site.

KVH Spruce for structural timber construction

Due to the technical drying, finger-jointing, and planed surface, the KVH Spruce NSi is suitable for numerous applications in structural timber construction. Typical areas of use include, for example, timber structures, substructures, frame constructions, as well as other load-bearing and structural components – in each case taking into account the planning and static requirements of the respective construction project.