Structural Solid Timber Spruce NSi – KVH beams planed & finger-jointed

Our structural solid timber made of spruce in NSi quality is suitable for numerous structural applications in timber construction. The KVH beams are manufactured from kiln-dried spruce wood, are planed on all sides, and have slightly chamfered edges.

The 13.0 m long bars are finger-jointed and can be cross-cut for shipping or according to your required length. The available cross-cutting options can be selected directly via the respective product variant.

Technical properties

• Wood species: Spruce
• Quality: NSi (non-visible)
• Structural solid timber / KVH
• According to DIN EN 15497 / DIN EN 14080
• Planed on all sides
• Edges slightly chamfered
• Half or heart-free cut
• Bars finger-jointed
• Kiln-dried (KD)
• Wood moisture approx. 15% (± 2%)
• Light-colored glue
• Weatherproof glued
• Dimensionally stable
• Initial length: 13.0 m
• Cross-cut depending on the selected variant

Cross-cutting of KVH beams

The beams are cut from a 13.0 m long starting bar according to the selected variant. This allows even longer KVH cross-sections to be ordered and transported conveniently.

Important note on cross-cutting:
We perform the cross-cut manually using a chainsaw. The cutting width of the saw results in a corresponding loss of material with every cut. Therefore, the specified segments may be slightly shorter than the calculated nominal dimension for cut combinations where the initial length corresponds exactly to 13.0 m. The cross-cuts are not to be understood as millimeter-accurate finished dimensions.

For applications where an exact final dimension is required, sufficient allowance should therefore be planned for subsequent fine trimming or final cutting on the construction site.

KVH spruce for structural timber construction

Due to the kiln drying, finger-jointing, and planed surface, the KVH spruce NSi is suitable for numerous applications in structural timber construction. Typical areas of use include, for example, timber structures, substructures, frame constructions, and other load-bearing and structural components – in each case taking into account the planning and static requirements of the respective construction project.