Structural Solid Timber Spruce NSi – KVH beams planed & finger-jointed

Our structural solid timber made of spruce in NSi quality is suitable for numerous structural applications in timber construction. The KVH beams are manufactured from kiln-dried spruce wood, are planed on all sides, and have slightly chamfered edges.

The 13.0 m long bars are finger-jointed and can be cross-cut for shipping or according to your required length. The available cross-cutting options can be selected directly via the respective product variant.

Technical Properties

• Wood species: Spruce
• Quality: NSi
• Structural solid timber / KVH
• acc. to DIN EN 15497 / DIN EN 14080
• planed on all sides
• edges slightly chamfered
• boxed heart or halved
• bars finger-jointed
• kiln-dried (KD)
• wood moisture approx. 15 % (± 2 %)
• light-colored glue
• weather-resistant glue
• dimensionally stable
• initial length: 13.0 m
• cross-cut depending on the selected variant

Cross-cutting of the KVH beams

The beams are cut from a 13.0 m long initial bar according to the selected variant. This makes it convenient to order and transport even longer KVH sections.

Important note on cross-cutting:
We perform cross-cutting manually using a chainsaw. Due to the kerf width of the saw, there is a corresponding loss of material with every cut. For this reason, if the sum of the partial pieces equals exactly 13.0 m, they may turn out slightly shorter than the calculated nominal dimension. Cross-cuts should not be understood as finished dimensions accurate to the millimeter.

For applications where an exact final dimension is required, sufficient allowance should therefore be planned for subsequent fine or finish cutting on the construction site.

KVH Spruce for structural timber construction

Due to the kiln drying, finger-jointing, and planed surface, the KVH Spruce NSi is suitable for numerous applications in structural timber construction. Typical areas of use include, for example, timber structures, substructures, frame constructions, as well as other load-bearing and structural components – in each case taking into account the planning and static requirements of the respective construction project.