Structural Solid Timber Spruce NSi – KVH beams planed & finger-jointed

Our structural solid timber made of spruce in NSi quality is suitable for numerous structural applications in timber construction. The KVH beams are manufactured from kiln-dried spruce wood, are planed on all sides, and have slightly chamfered edges.

The 13.0 m long bars are finger-jointed and can be cut to size for shipping or to suit your required length. The available cutting options can be selected directly via the respective product variant.

Technical properties

• Wood species: Spruce
• Quality: NSi (non-visible)
• Structural solid timber / KVH
• According to DIN EN 15497 / DIN EN 14080
• Planed on all sides
• Edges slightly chamfered
• Half-timber or cross-timber
• Bars finger-jointed
• Kiln-dried (KD)
• Wood moisture approx. 15% (± 2%)
• Light-colored glue
• Weather-resistant glue
• Dimensionally stable
• Initial length: 13.0 m
• Cutting depending on the selected variant

Cutting of the KVH beams

The beams are cut from a 13.0 m long initial bar according to the selected variant. This allows even longer KVH cross-sections to be ordered and transported conveniently.

Important note on cutting:
The cuts are made manually by us using a chainsaw. Due to the kerf width of the saw, there is a corresponding loss of material with every cut. The specified sections may therefore be slightly shorter than the calculated nominal dimension if the combination of cuts adds up to exactly 13.0 m. The cuts are not to be understood as finished dimensions accurate to the millimeter.

For applications where an exact final dimension is required, a sufficient allowance should be planned for later precision trimming or finishing on the construction site.

KVH spruce for structural timber construction

Thanks to the technical drying, finger-jointing, and planed surface, the KVH spruce NSi is suitable for numerous applications in structural timber construction. Typical areas of use include, for example, timber structures, substructures, frame constructions, as well as other load-bearing and structural components – in each case taking into account the planning and static requirements of the respective construction project.